← Pipe & Skill home
Watch. Understand. Practise.

Find your
next skill.

Plumbing lessons, from the first bend to the detail inside a fitting. Choose a topic or search for the skill you want to understand.

13 lessons to explore

Copper bending

Copper pipe offsets: calculate, mark and bend

Follow the updated copper offset guide, from working out the dimensions to marking and bending the pipe.

Explore lesson
Copper bending

Copper offsets: the 30°, 45° and 60° multiplier method

Explore how the choice of bend angle changes the calculation for a copper pipe offset.

Explore lesson
Quizzes

Can you spot 10 plumbing faults?

Take a three-minute video quiz and practise looking for plumbing faults.

Explore lesson
Quizzes

40-question plumbing skills quiz

Test your plumbing knowledge with a longer video quiz for practice and revision.

Explore lesson
Soldering

How solder flows inside a copper fitting

Capillary action draws molten solder into the narrow gap between the tube and fitting. It is the same effect you can see in the cutaway demonstration.

Explore lesson
Fittings & valves

Inside a push-fit fitting: grip and seal

The O-ring seals around the pipe. The grip and the seal do different jobs inside the fitting.

Explore lesson
Fittings & valves

How a check valve works

A check valve allows flow in one direction and closes against reverse flow. It is also called a non-return valve.

Explore lesson
Fittings & valves

Understanding tee-piece sizing

An equal tee joins three pipes of the same connection size, creating a branch from the main run.

Explore lesson
Fittings & valves

Inside a 22mm copper press fitting

A compatible press tool and jaws compress the fitting onto the tube. The fitting is designed to make a sealed connection without soldering.

Explore lesson
Fittings & valves

Inside a gate valve

The handwheel operates a threaded mechanism that raises or lowers the gate. Moving the gate out of the flow path opens the valve; lowering it closes the path.

Explore lesson
Copper bending

Bending a half crossover in copper pipe

A crossover bend changes the route of a pipe to provide clearance around an obstruction, such as another pipe. The position and shape of the bend determine that clearance.

Explore lesson
Water systems

The five water fluid categories explained

Fluid category 1 is wholesome drinking water supplied by the water undertaker. Higher categories describe increasing contamination risks or changes to water quality.

Explore lesson
Tools

Inside the plumbing toolbag

The movable jaw changes the opening so the spanner can fit different sizes of nuts. Adjust it for a close fit on the flats of the nut.

Explore lesson

Ready to put it into practice?

Take the 10-question plumbing quiz →